Search found 4 matches

by 75evo
Fri Feb 22, 2019 10:17 pm
Forum: Wanted!
Topic: Clutch Master Cylinder for QV24 RHD
Replies: 42
Views: 23042

Re: Clutch Master Cylinder for QV24 RHD

Hi guys, My mom's RHD 164 3.0 V6 12V also had a clutch MC problem. After much searching I finally bought her a Lancia Delta Integrale LHD MC and it seems to fit. Not sure if this is the same as the RHD 164 24V unit though. She seldom drives the car, could be part of the problem. She's got a 156 GTA ...
by 75evo
Wed Jan 04, 2017 4:54 pm
Forum: Technical
Topic: IAC / ICV / idle air control valve circuit problem
Replies: 2
Views: 1345

Re: IAC / ICV / idle air control valve circuit problem

Sorry I fixed this problem, the knock sensor and ICV connectors were swapped.

Now I have a different problem. 1255 cam sensor. Will not rev past 2000 rpm.
by 75evo
Tue Dec 20, 2016 12:25 am
Forum: Technical
Topic: IAC / ICV / idle air control valve circuit problem
Replies: 2
Views: 1345

IAC / ICV / idle air control valve circuit problem

HI Guys, I'm getting the 1-2-3-3 error code on my 164 LS. When I check the ICV with the engine running but plenum ports plugged, it's not spinning. Replaced it with another ICV, same behavior. Nothing. Check voltage and it was 0. But since this is a PWM circuit, I also. checked with an oscilloscope,...
by 75evo
Mon Dec 19, 2016 7:23 am
Forum: Technical
Topic: ICV Idle Control Valve No Signal From Connector
Replies: 0
Views: 2334

ICV Idle Control Valve No Signal From Connector

HI Guys, I'm getting the 1-2-3-3 error code on my 164 LS (1995 with EGR, USA only). When I check the ICV with the engine running but plenum ports plugged, it's not spinning. Replaced it with another ICV, same behavior. Nothing. Check voltage and it was 0. But since this is a PWM circuit, I also. che...