Alfa Romeo 164 Register.com

it's in the planning.. but i have times im very busy and times i have time to get on with my other stuff like the program.. so when i start with that again. also the viscomatic.

you're welcome. just ask when you need more info

No, i don't use cam locks. Yea, you can do it both with or without TDC gauge. On the flywheel (timingbelt side) there is a marking for TDC. So if you don't have a TDC gauge, you can use that one. I don't have pictures right now, but here is a picture from the manual: http://alfaromeo164register.com/...

it looks a little weird on this picture.. also the metal goes down there.. is that the fron bank? i can make pics the next time i do it.
btw.. i see the marking at the backside lining up ?

the biggest and deepest one where you can put your nail in. You'll see it as you also see it on the size of the camshaft.

you can easily time the camshafts and the crankshaft without the tools. There are markings on the ends of the camshafts (other end then where the belt is) if you put the crank on TDC, the camshaft marking should line up with the horizontal part of the top.. i never use those tools to time it.. and t...

Welcome neighbour. nice collection

so, the light is off now ?

lol i love the service book. Could have been thaiwanese.. right East?

same distance for me..

i don't see where it currently is?

nice for you alfan. else it goes to scrap.. might be cheap?

Welcome. Nice car

well.......

well normal electrical parts don't quit when hot. you might check the condensators.. those tend to give up when temp gets higher.

throttle position sensor >> old type toyota avensis. i think it was a 97 it's the 89452-05010 bosch number
http://www.miparts.com/detail/sensor-th ... h0Sb9JHLgE

LOL

for the 4WD.. it might be worth to check the oil lines as the engine was out and now you have 4WD probs. hart to believe the piston is suddenly broken...

Ok, just use the driver that works for now.
Do you receive anything back ? in the top of the program, you should see some id numbers showing up.
Are you sure you have the right connector for the airbag? (next to the glove compartment)
is the airbag tab selected before you try to connect?

welcome m8. Here you can find info about the diagnostics and ask questions.
http://alfaromeo164register.com/viewtop ... f=2&t=1108

He's reading here too normaly, so, Ed fix this!!

don't forget to tighten the gearwheel of the oilpump

got the main ground cable on ?

haha thats why i have a boat