4 wheel drive error code

[Integrale evo]

The 4wd function ok, but i have the lamp on all the time. I have taken out a fault log, think its dutch languish . Someone that can translate/give a ide what parts is failing. Tried google translate but that dident give me much. Found out it was some short circuit but on what part ect?


1 Signal Angle papillon Amplitude signal erronee
2 Temoin defaillance Circuit Ouvert
3 Signal feux de stop circiut ouvert
4 Valve regul. flux court circuit
5 Signal feux de stop signal toujours off
6 Press. system hydraulique

[164 TD]

This is french.

1 Signal Angle butterfly Signal amplitude erroneous
2 Failure Warning Circuit Open
3 Signal stop lights circiut open
4 Valve regul. short circuit flow
5 Signal stop lights signal always off
6 Press. hydraulic system

I think that Gilles can give the most proper translations.

[Integrale evo]

Okay, thanks. Not all gives a meaning but i will start with the stop light circuit

[Alfan]

They all seem to be electrically related, so probably worth checking the wiring. Did the light come on recently and did the 4WD change behaviour when that happened?

[Integrale evo]

The light has been on since I change ABS unit with a working on then the 4 wheel drive start to function and light came on

[pinino]

I assume that the French text provided in the first post came from the Fiat-Lancia Tester. If so, you should get the English version of M12A viscomatic module, member "Alfisty" can help you.