Home Register Manuals 164 Forum Interactive Library
Login

 
 

Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Let us get to know you. (and your 164!)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby alfa east » Tue Jan 02, 2018 10:18 am

Great news!
User avatar
alfa east
3.0 V6 24V automatic
 
Posts: 1127
Joined: Sat Oct 24, 2009 10:26 am
Location: Bangkok
Country: Thailand (th)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby Alfan » Wed Jan 03, 2018 7:54 pm

Looks like a good heart - hope it also beats well 8)
1994 Alfa Romeo 164 Q4 Proteo Rosso 550.000km
1989 Lancia Thema 8.32 Verde Indy 265.000km
2001 Alfa Romeo Spider 3.0 24V Blue Lightning 55.000km
2015 Alfa Romeo 4C Rosso Competizione 80.000km
User avatar
Alfan
Q4 owner
 
Posts: 1084
Joined: Thu Oct 22, 2009 8:20 pm
Location: Denmark
Country: Denmark (dk)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby MikeCZ » Mon Jan 15, 2018 2:14 pm

Thanks guys :)
Again small steps further, cleaning of oil pan + pump:
cisteni_vany.jpg

olejova_pumpa.jpg


Also bushings for engine upper mount finaly arrived so I have complete new engine mounting prepared:
nove_ulozeni_motoru.jpg


And I have ordered new camshaft for front (left) head - I have already one for rear (right) head which still can be bought for "peanuts", whereas the one for front head is kind of tricky. Nonetheless I have decided to go with the new part (from Ajusa) and not send one of mines (have 3 of them already, all worn out :lol:) for refurbishment. So I'm curious how it will hold.
Alfa Romeo 164 2.0 V6TB 1995
Ex: Alfa Romeo 159 2.4 JTDm 2007 berlina
Ex: Fiat Stilo 1.4 MW 2007
User avatar
MikeCZ
 
Posts: 78
Joined: Sat Nov 19, 2016 10:59 am
Location: Ostrava region
Country: Czech Republic (cz)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby MikeCZ » Fri Jan 19, 2018 2:06 pm

And it's finally here:
IMG_20180119_144424.jpg
Alfa Romeo 164 2.0 V6TB 1995
Ex: Alfa Romeo 159 2.4 JTDm 2007 berlina
Ex: Fiat Stilo 1.4 MW 2007
User avatar
MikeCZ
 
Posts: 78
Joined: Sat Nov 19, 2016 10:59 am
Location: Ostrava region
Country: Czech Republic (cz)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby MikeCZ » Thu Feb 08, 2018 10:47 am

Some new stuff just arrived - new intake valves, valve seals, knock sensor, some piping...
ventilove_gufera.jpg

nove_saci_ventily.jpg

And did some cleaning (not 100% but still better then it was :D)...
AC_kompresor_po.jpg

AC_kompresor_pred.jpg

Servo_pumpa_pred.jpg

Servo_pumpa_po.jpg
Alfa Romeo 164 2.0 V6TB 1995
Ex: Alfa Romeo 159 2.4 JTDm 2007 berlina
Ex: Fiat Stilo 1.4 MW 2007
User avatar
MikeCZ
 
Posts: 78
Joined: Sat Nov 19, 2016 10:59 am
Location: Ostrava region
Country: Czech Republic (cz)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby MikeCZ » Tue Apr 03, 2018 5:52 pm

The heads are finally back - resurfaced, re-grinded valve seats, new bronze valve guides, cleaned old exhaust valves and leaped in, leaped in new intake valves, pressure test done.
rear_head_repaired.jpg

front_head_repaired.jpg

Besides that arrived new middle exhaust silencer and some pipes. Also I have replaced heating readiator (since it was easily accessible with engine out of the car :lol:)
And this is how looks the cylinder no. 3 from the old engine - the one with which all started:
praskla_3.jpg

But also I have found out that the "new" engine has already had some troubles, this is how looks cylinder no. 5:
valec_6_new_hit1.jpg

However I'm not to keen to put back cylinder like that - so I will put there cylinder no.5 from the old engine - I have checked and they're the same category, plus I made some measurements and difference in weight of set of cylinder + conrod + bearing + conrod bolts between new and old engine is 1g, which is OK I guess :wink:
Still, the conrod bearings look like that:
c1_bearing.jpg
c2_bearing.jpg

So I will put in new conrod bearings Glyco STD. Regarding crankshaft bearings I'm not sure about their status yet (have to take them out, have it on my to-do list), but most likely I will replace them as well - I just did not decided yet if I will use OEM (about which I'm not sure which of the 3 variants to use :D) or the Glyco STD as well...
Alfa Romeo 164 2.0 V6TB 1995
Ex: Alfa Romeo 159 2.4 JTDm 2007 berlina
Ex: Fiat Stilo 1.4 MW 2007
User avatar
MikeCZ
 
Posts: 78
Joined: Sat Nov 19, 2016 10:59 am
Location: Ostrava region
Country: Czech Republic (cz)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby Alfan » Mon Apr 16, 2018 7:28 pm

Those heads are looking good! :D
1994 Alfa Romeo 164 Q4 Proteo Rosso 550.000km
1989 Lancia Thema 8.32 Verde Indy 265.000km
2001 Alfa Romeo Spider 3.0 24V Blue Lightning 55.000km
2015 Alfa Romeo 4C Rosso Competizione 80.000km
User avatar
Alfan
Q4 owner
 
Posts: 1084
Joined: Thu Oct 22, 2009 8:20 pm
Location: Denmark
Country: Denmark (dk)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby MikeCZ » Thu May 03, 2018 6:05 pm

Indeed they do :D
Small progress again - except for oil pan the bottom is done - all cleaned and put in new Glyco STD crankshaft and conrod bearings, new simerings and linner's seals.
Unfortunately I just don't have such nice pictures and it's not done as thoroughly as in case of Killergame's 164 :oops:
Attachments
IMG_20180503_184234.jpg
Alfa Romeo 164 2.0 V6TB 1995
Ex: Alfa Romeo 159 2.4 JTDm 2007 berlina
Ex: Fiat Stilo 1.4 MW 2007
User avatar
MikeCZ
 
Posts: 78
Joined: Sat Nov 19, 2016 10:59 am
Location: Ostrava region
Country: Czech Republic (cz)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby killergame » Thu May 03, 2018 9:59 pm

Hehe not as clean as mine indeed, but I put into cleaning of all engine parts like 1/2 of the hole engine rebuild time :lol: :mrgreen:

Still, great job! :D

BTW clean engine block edge where gasket sits very very good! And also top edge of cylinders where gasket sits. For cylinders I used very soft metal brush in drill machine. And for engine block inox spirale for dishes. Top stuff for cleaning aluminum!
Alfa 164 3.0 QV 1993
Alfa 156 1.9 JTD 2000
Alfa 164 2.5 TD 1993 - ex
Alfa 164 2.0 TS 1991&1989 - ex
Alfa Giulietta 2.0 1974 - ex
User avatar
killergame
 
Posts: 99
Joined: Sun Aug 17, 2014 9:29 pm
Location: Slovenia
Country: Slovenia (si)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby MikeCZ » Fri May 04, 2018 7:12 am

Thanks for the tip, will buy some today :)
Alfa Romeo 164 2.0 V6TB 1995
Ex: Alfa Romeo 159 2.4 JTDm 2007 berlina
Ex: Fiat Stilo 1.4 MW 2007
User avatar
MikeCZ
 
Posts: 78
Joined: Sat Nov 19, 2016 10:59 am
Location: Ostrava region
Country: Czech Republic (cz)

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby harryw » Fri May 04, 2018 6:33 pm

Looking clean, man. Good job
harryw
 
Posts: 2
Joined: Wed Mar 21, 2018 1:29 pm

Re: Alfa 164 2.0V6 TB Super (1995) - MikeCZ

Postby killergame » Mon May 07, 2018 8:37 pm

One more thing! Buy new bolts for water pump. They are standard size M6 I think. I think they are 2 long, 2 short and 8 middle if I remember correct. :) Just take old samples of all 3 bolts sizes with you to shop.
Alfa 164 3.0 QV 1993
Alfa 156 1.9 JTD 2000
Alfa 164 2.5 TD 1993 - ex
Alfa 164 2.0 TS 1991&1989 - ex
Alfa Giulietta 2.0 1974 - ex
User avatar
killergame
 
Posts: 99
Joined: Sun Aug 17, 2014 9:29 pm
Location: Slovenia
Country: Slovenia (si)

Previous

Return to Introduce yourself

Who is online

Users browsing this forum: No registered users and 1 guest