Home Register Manuals 164 Forum Interactive Library
Login

 
 

My facelift 3.0 V6 Super and 96 Q4

Let us get to know you. (and your 164!)

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Integrale evo » Wed Jan 11, 2017 8:16 pm

Fuel gauge only show 1/2 full, open upper sensor cover and the sensor had fallen off. Reinstalled and all good.
Clean and clean the new reacaro seats. Finaly ready to be installed .
Attachments
IMG_5322.JPG
Integrale evo
 
Posts: 75
Joined: Sat Sep 18, 2010 6:08 am

Re: My facelift 3.0 V6 Super and 96 Q4

Postby alfa east » Thu Jan 12, 2017 4:36 am

They look in perfect condition these Recaros!
User avatar
alfa east
3.0 V6 24V automatic
 
Posts: 1044
Joined: Sat Oct 24, 2009 10:26 am
Location: Bangkok
Country: Thailand (th)

Re: My facelift 3.0 V6 Super and 96 Q4

Postby M164 » Sun Jan 22, 2017 3:16 pm

look forward to seeing these fitted
M164
 
Posts: 16
Joined: Tue Sep 27, 2016 11:11 am

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Integrale evo » Sun Jan 29, 2017 1:31 pm

There are some cracks, but i have color it back to original color. After problem with heating and tilt in front of driver seat, I had to take it out of the car again for a fix. The wire for tilt was out of position so had to modify it to get it back into the motor. Heater switch was stuck so had to take it out to get it into operation. Now all function is up running.

The fuel level indicator has been showing empty even if the tank was full, found a cable break and now I measure around 106 ohm on the circuit when 1/4 full tank.
Attachments
IMG_5379.JPG
IMG_5406.JPG
Integrale evo
 
Posts: 75
Joined: Sat Sep 18, 2010 6:08 am

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Integrale evo » Sun Jan 29, 2017 4:24 pm

Cold but Nice weather
Attachments
IMG_5420.JPG
Integrale evo
 
Posts: 75
Joined: Sat Sep 18, 2010 6:08 am

Re: My facelift 3.0 V6 Super and 96 Q4

Postby M164 » Mon Jan 30, 2017 10:51 am

Integrale evo wrote:There are some cracks, but i have color it back to original color. After problem with heating and tilt in front of driver seat, I had to take it out of the car again for a fix. The wire for tilt was out of position so had to modify it to get it back into the motor. Heater switch was stuck so had to take it out to get it into operation. Now all function is up running.

The fuel level indicator has been showing empty even if the tank was full, found a cable break and now I measure around 106 ohm on the circuit when 1/4 full tank.


They look great, well done. It's a good feeling when the list of faults on your car gradually get smaller
M164
 
Posts: 16
Joined: Tue Sep 27, 2016 11:11 am

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Vukman » Mon Feb 27, 2017 1:48 pm

Your Q4 looks great!
I saw that you have changed the hoses for the 4WD, I have sent you a pm about that. Would be grate if we could get in touch because I'm changing my next weekend and I have some questions about it.
164 Q4 -97
Vukman
 
Posts: 2
Joined: Wed Feb 22, 2017 9:13 am
Country: Sweden (se)

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Alfan » Sun Mar 05, 2017 12:02 pm

I have sent you a PM regarding the 4WD hoses, you had made. Let me know if you have received it or not.
1994 Alfa Romeo 164 Q4 Proteo Rosso 535.000km
1989 Lancia Thema 8.32 Verde Indy 260.000km
2015 Alfa Romeo 4C Rosso Competizione 60.000km
User avatar
Alfan
Q4 owner
 
Posts: 959
Joined: Thu Oct 22, 2009 8:20 pm
Location: Denmark
Country: Denmark (dk)

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Integrale evo » Wed Mar 15, 2017 10:00 pm

Hi, dident see it before now, i cant find any pm from you? Yes now i see, the swedish guy. I sent you a Mail some weeks Ago.
I sent a new one now
Integrale evo
 
Posts: 75
Joined: Sat Sep 18, 2010 6:08 am

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Alfan » Thu Mar 16, 2017 9:05 am

Ok, the system is apparently very unstable :(

Anyway, 'Vukman' needed help in getting new hoses made, and since you had done that, I referred him to you. He has managed to get it done, but he might still reply here about the results.
1994 Alfa Romeo 164 Q4 Proteo Rosso 535.000km
1989 Lancia Thema 8.32 Verde Indy 260.000km
2015 Alfa Romeo 4C Rosso Competizione 60.000km
User avatar
Alfan
Q4 owner
 
Posts: 959
Joined: Thu Oct 22, 2009 8:20 pm
Location: Denmark
Country: Denmark (dk)

Re: My facelift 3.0 V6 Super and 96 Q4

Postby alfa east » Sat Apr 08, 2017 10:54 am

Oh, I reacted on this in an earlier mail (after my long absence). Going down the loooooong list of Unread postings I see this was discussed here already :oops: .
User avatar
alfa east
3.0 V6 24V automatic
 
Posts: 1044
Joined: Sat Oct 24, 2009 10:26 am
Location: Bangkok
Country: Thailand (th)

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Integrale evo » Sat Apr 22, 2017 9:01 pm

Summer wheels on :)
Attachments
IMG_5637.JPG
Integrale evo
 
Posts: 75
Joined: Sat Sep 18, 2010 6:08 am

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Alfan » Mon Apr 24, 2017 4:38 pm

I hope summer also arrived, as not really the case a little further south...

They are looking good 8)
1994 Alfa Romeo 164 Q4 Proteo Rosso 535.000km
1989 Lancia Thema 8.32 Verde Indy 260.000km
2015 Alfa Romeo 4C Rosso Competizione 60.000km
User avatar
Alfan
Q4 owner
 
Posts: 959
Joined: Thu Oct 22, 2009 8:20 pm
Location: Denmark
Country: Denmark (dk)

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Ladin164QV » Mon Apr 24, 2017 5:21 pm

Very nice wheels! :D
93' Alfa Romeo 164 3.0 V6 24V
Ladin164QV
QV 24V owner
 
Posts: 137
Joined: Fri Jan 29, 2010 10:51 am
Location: Czech Republic /Karlovy Vary
Country: Czech Republic (cz)

Re: My facelift 3.0 V6 Super and 96 Q4

Postby Integrale evo » Fri Apr 28, 2017 10:02 pm

Oh yeees summer is comming, wash and wax today. Hell of a job
Attachments
polert (2).JPG
Integrale evo
 
Posts: 75
Joined: Sat Sep 18, 2010 6:08 am

Re: My facelift 3.0 V6 Super and 96 Q4

Postby AlfaWhiz » Fri Apr 28, 2017 11:33 pm

Alfan wrote:I have sent you a PM regarding the 4WD hoses, you had made. Let me know if you have received it or not.


Guys, as I'm looking forward to replacing my 4x4 hoses very soon, could you please post a guide in the alternative parts section? It would be highly welcome. I'm looking for ways to fit the hoses around the gas tank and overall description of the process. Would be much appreciated. :)
User avatar
AlfaWhiz
 
Posts: 317
Joined: Thu Feb 06, 2014 1:15 pm
Country: Poland (pl)

Previous

Return to Introduce yourself

Who is online

Users browsing this forum: No registered users and 2 guests