Page 3 of 5

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Wed Mar 04, 2015 5:28 pm
by Alfan
Awesome :mrgreen:

Where did you get the hoses for the 4WD made?

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Wed Mar 04, 2015 6:32 pm
by Integrale
I contacted the guy you used in Danmark but he was not happy to ship. I made them in a Local hyd stor. Several time to and back to Get it fitted. I still miss one double banjo bolt as you can see on the first picture. I hope this Will function. Used 6 mm pipe insted of 5mm for supply from servo. Anyway all hoses are reachabel for modification

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Thu Mar 26, 2015 11:14 am
by Integrale evo
Then the car has been on the road for the first time in 5 years. 1 hour drive, almost everything is good, nice ride, suspension is in good shape and the car feels tight. Small vibration from the front wheel and the injection lamp is lid. I don't know yet what fault this could be. Best of all was the 4 wheel drive, the symbol was on till i got over 30km/h and the it switch off :D :D :D :D :D , but should it switch off after few second when starting?
Tested it on gravel and it spin on all four wheels :shock: :shock: :shock: :shock: :shock:

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Fri Mar 27, 2015 6:47 pm
by AlfaGuzzi
Great news.
Last time I saw it, it was not running at all.
This Q4 came to the right home :D

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Fri Mar 27, 2015 7:48 pm
by Alfan
Great news :D

Did you get the diagnosis sw to connect to ECU? That might tell you why the injector light is on.

The 4WD light should go out after a few seconds with ignition on - I think.

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Fri Mar 27, 2015 9:44 pm
by Integrale evo
Yes i have software, do you know were the 3pin plug is?

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Tue Mar 31, 2015 7:37 am
by Alfan
Integrale evo wrote:Yes i have software, do you know were the 3pin plug is?
Yes, you should remove the carpet on the right side (passenger side also in the case of the Q4 :) ) of the center console. There are 2 or 3 screws and you need to 'unclick' the plastic next to the center display. Behind the carpet you will find the 3-pin plugs and boxes for both the Motronic and Viscomatic.

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Tue Mar 31, 2015 5:31 pm
by Integrale evo
Thank you !!! I Will have a look after easther :)

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Wed Apr 01, 2015 5:28 pm
by Integrale evo
Then i got my hands on a stainless steel exhaust. That is what the car need most of all. Also got the "hatch" on the back bumper. Now i Looking for the black air inlet hose to the plenum :)

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Fri Apr 17, 2015 6:00 pm
by Integrale evo
Still waithing on the exhaust, but i have plenty other thing to do. Today a shine inside engine room and doors.

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Sun Apr 26, 2015 10:29 pm
by Integrale evo
Small things to improve the Big picture :)

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Thu May 07, 2015 2:24 pm
by Integrale evo
Stainless steel exhaust has arrived. Nice stuff made by Ferritta

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Tue Nov 15, 2016 8:44 pm
by Integrale evo
New Recaro seats are on there way from Hungary :), ABS module is soon one his way from Holland. Things happen here, new BBS CH 19" bought and will be ready for the spring. Working with a painter to get black paint on the plastic all around.

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Tue Nov 15, 2016 8:47 pm
by Integrale evo
BBS CH

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Wed Nov 16, 2016 6:35 am
by alfa east
Wow! That sounds appetizing! Curious to see the results in due time.

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Mon Dec 12, 2016 7:22 pm
by Alfan
Wow, you have been busy! :)

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Mon Dec 19, 2016 3:53 am
by Integrale evo
Should have been at home and starting repair the Recaro seats, but had to work one more week away on a job. More work is more money into the car :mrgreen:

Have bought full leather cleaning and color matching set for the seats , Colourlock system.

Alarm and remote control will be sent to England to be put back to "start" so it will function with the new remote. Got a tip that it's best to use two CR2016 insted of one CR2032, you got little bit higher voltage and the range will improve. Picture will come when I am back at home 20 Dec.

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Tue Dec 20, 2016 3:09 am
by alfa east
Interesting developments; looking forward to seeing the results (and/or work in progress).

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Mon Jan 02, 2017 9:03 pm
by Integrale evo
When the weather turned colder I decided to try to change the abs ecu in hope of snow. I had earlier found out that the ecu was dead since all relay and power to the unit was function. New ECU for abs fitted, and yeeeees abs and 4 wheel drive is back on again. Today the snow arrived :) so straight out for a real test, very Nice system, almost as good as 155 Q4 from take off with snow under the wheels :P . Tok a video of poor quality that i hope to upload soon :)
The 4 wheel drive warning lamp is still on, so have to checked what this is, also the injection lamp lied up. Before this warning lamp only lied now and then, but now its on all the time. Think the old abs ecu fucked up the motor ECU.

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Mon Jan 02, 2017 9:26 pm
by Alfan
:mrgreen: :mrgreen: :mrgreen:

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Mon Jan 02, 2017 10:00 pm
by Integrale evo
https://youtu.be/pPlfxRBavBA" onclick="window.open(this.href);return false;

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Tue Jan 03, 2017 10:06 am
by Alfan
8)

Been a while since I did that with my Q4 - due to lack of snow and 4WD...

Looks like the 4WD light is on??

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Tue Jan 03, 2017 10:31 pm
by Integrale evo
Yes it is, have to read the fault code, but still the 4wd function. I think it is the speedsignal from speedometer that shows 186km/h all the time. Before I change the ABS module it went of after a minute. I have to invest in a action camera, not easy to take video with the iPhone when driving and controling the car.
Snow is not here to often either, but 25 min drive we have plenty!

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Thu Jan 05, 2017 9:27 am
by Alfan
Where do you see the read out of 186km/h? It seems that your speedometer does not have any reading?

Have you read out possible error codes from the motronic?

Re: My facelift 3.0 V6 Super and 96 Q4

Posted: Fri Jan 06, 2017 10:24 pm
by Integrale evo
The speedometer is function now and then, but the ECU is taken signal from the speedometer and. When connect with diagnostic it shows 186km/h. Faults on ECU is knock sensors and this speed signal.