Good tip to kill the ecu!AlfaWhiz wrote: Pro tip: newer Bosch injectors (red) with 4 nozzles for 3.2, GTA, etc. fit nearly out of the box.
The red valves have a resistance of 14.5 Ohm, whereas the original valves have 15.9 Ohm. This results in 10% higher current in the ecu, which is not good at all... You could install an additional resistance between the ecu outlets and the injector's plugs in order to compensate the higher current. But then the injection flow would be too less because of the General lower capacity of the red valves (172g/min to 183g/min).