Alfa Romeo 164 Register.com

166 V6 diesel does not exist... at least not from Alfa factory. Diesel on 166 is R5 ALWAYS and size of 2.4. Valves on the engine either 10 or 20 but size and cylinder count always the same.

I know of a few guys who tried it, and I will be looking to do just that as soon as my front rotors wear out :D From what I heard, you want 166 4 pot calipers and 330 mm brembo discs from GTA. The discs are 32 mm thick compared to 166's 28 mm so calipers need to be widened but still far easier and ...

Want to buy V6 TB crankshaft for GTV TB or 164. 166 TB one is different.

If you have one available or know where i could find one, i am interested in all info!

Thanks and best regards,

markosavela@hotmail.com / PM

Vehje wrote:And I have to say this is ex"Tamariini" Q4. 295 000km and still going strong 4x4 (as well as sometimes 4x2)

i sure have missed that engine sound

Did this pressure sensor problem with too low system pressure cause that occasional 4x2 mode? Good that you had it sorted out!

Inertiaswitch (crash switch) cuts the fuel supply/power from the fuel pump on an accident. I am not 100% sure if 164 had one but GTV and 155 from the same era definitely had those switches and i have a feeling my 164 Q4 had one also but hard to remember for sure... If someone has wiring diagram for ...

Is the fuel supply inertia switch connected or bypassed/disabled completely? maybe some problem there i might guess?

alfa east wrote:Wow, I trust you bought the one with the boomerang tail lights? (sorry for off-topic)

Yes, looking almost exactly like this (not the same car though...)

Alfan wrote:Yes, sounds reasonable.

Btw. is the 3200GT a recent addition to your garage? That is on my wish list of cars in the garage

Yes it is, about 5 weeks ago i bought one

Yes,

that is the price what he is asking. to me it seems very reasonable the phone number is also direct number for the seller.

link to Finnish alfa bbs adverticement (not mine but i know the seller)

http://www.alfabbs.fi/viewtopic.php?f=2 ... 93#p566893" onclick="window.open(this.href);return false;



hp. 500e

+358504127746

I've already sold my 164 Q4 so my need for the hose is gone by now. I linked this product of yours to a Finnish Alfa Romeo bbs, there are at least 5 to 6 Q4 owners which i believe have same problems with splitted hoses (at least one has, who has my ex-Q4) http://www.alfabbs.fi/viewtopic.php?f=1&...

Those orange wires belongs to temperature sensor on the thermostat housing and black wire (ground) under the bolt under thermostat housing. I'm not sure about the green and other black wire, if i remember correctly they are from oil level sender?

Hi Helli, you can use Kappa 3.0 engine with 164 Q4 gearbox. bolts straight in. to fit Q4 drive axle "stub" on the right hand side of the car you have to use Q4 oilfilter bracket with kappa engine. There is a small offset between these two and they don't mix :? You also have to use wiring l...

164 TD wrote:Alfast has a good running lower enginepart. Only the camshafts are removed.

thanks for the tip, i sent him PM

Hi all, I need crankshaft for my 2.0 V6 TB engine, mine is totalled and not repairable :oops: If you got one which you don't need or know where i could find one, please send me PM :) even faulty ones (but repairable) will be notified at this point! Best Regards, Tamariini http://www.alfabb.com/bb/fo...

I am looking to have the oil cooler on my Q4 replaced, as it is leaking a little at the joints to the oil lines. Eper gives this part number 46469283 and it shows that it is the same one for all the V6's. Can anyone confirm this and if you have bought a new one, where did you get it from? Do you kn...

Time for an update of my cars :) At summer i bought a GTV6 which is about to be 3.0 24v in very near future. First thing was massive rust repair operation and respray. starting point was something like this... pic taken after rust repairs. http://www.alfabbs.fi/download/file.php?id=7165 and this is ...

Do you have the original Alfatester or can you borrow one? For about 40 euro's you got yourself a Viscomatic module and you know it all. i've got viscomatic module and tester but i haven't been able to make a connection and read fault codes. My marelli tester could be failed, connection to other mo...

Back on the 4x4 diagnostics again :? 4wd is working flawlessly while driving, but on idle malfunction light is on after a time period between 1 to 20 minutes. Not a huge problem because i don't have to idle it much... So malfunction light is basically turned on only on a traffic jam or similar.. Aft...

I just bought (yes, again...) reconditioned Q4 steering rack. I asked for which fluid are gaskets made for and got an answer that gaskets are the same that are used on a FWD models so recommendation is ATF. So my question is, can i use ATF without damaging Viscomatic? I think ATF won't ruin anything...

I have H & R 30mm thick spacers on my Q4 at rear axle. works like a charm with stock Q4 rims

Welcome!

Nice to have more Finns on this site

I am wondering though if Tutela GI/R (green) in the latest version from Alfa works as I had intended... In my Q4 it doesn't... I forgot to ask which oil you are using now? I still have this new type of GI/R. works fine when it's cold (winter time) but on "hot" summerdays i get too little ...

Alfan wrote:I am wondering though if Tutela GI/R (green) in the latest version from Alfa works as I had intended...

In my Q4 it doesn't...

Yes, mine's from Thema. really rustfree