Alfa Romeo 164 Register.com

And still the old french licenceplates!

did you measure it for continuity?

It could be just a broke wire.

The abs system is a failsafe system, when the abs is out of order, you still have full brakes, only the anti skidfunction is missing.

See if Ed/ Alfist still has some on stock.

send him a PM

It should be plug and play. Did you install the correct relay?(Not all the blockrelays have the same internals) Did you turn your lightswitch to city or dimlight? Do you hear the relay click? Does the foglightsymbol comes on on your instrument panel? What if you jumper 30 and 87 on the relayholder? ...

Since the photoalbum isn't working, I sent you an email with the procedure.

Arjen

Awesome couple!

If I recall correctly, those are metal filters, not paper. They can be cleaned ultrasonic and re-used.

The TDC timingmark you can see on the pulley on the crankshaft on the picture, it has to line up with the ridge on the side of the engine.

I found the timingtools still for sale on AliExpress.

Search for "Alfa v6 timing tools" and you will see 2 sets for sale for around 22 euro.

No need for the arm and weight, if the pin fits in the damper, the tension is ok (Turn the engine a few times by hand to recheck it. I bought a set of calipers at Aliexpress for the Twinspark 147, the might sell them there as well for the 24V. Otherwise make timingmarks yourself with a white marker....

Isn't this a line that can be duplicated by any hydro-shop?

https://www.autostoria.com/en/braking/1 ... 05589.html" onclick="window.open(this.href);return false;

http://alfaromeo164register.com/community/fotoboek/userpics/164%20TD/Q4%20info//viscokleur2.jpg Still wondering what part of the gearbox the actual piston is. You can see the viscomatic coupling plates very clearly, but the piston that "squeezes" the viscomatic plates and the piston that ...

This is french.

1 Signal Angle butterfly Signal amplitude erroneous
2 Failure Warning Circuit Open
3 Signal stop lights circiut open
4 Valve regul. short circuit flow
5 Signal stop lights signal always off
6 Press. hydraulic system

I think that Gilles can give the most proper translations.

You're welcome!

Glad it's running again!

Nice videoclip, Marcus!

Awesome project!

For the airbag, follow this tread:

http://www.alfaromeo164register.com//vi ... lit=dimtey" onclick="window.open(this.href);return false;

It looks like they are original and originate from a cableloom.

Is this drawing of any help?

Looks like the the inside of the connector E10 of the foglight.

I sent you some info about the VM engine via email

Is your start/stop solenoid on the pomp working?

Do you have a VP (mechanical) or a VE (electrical) pump installed?