Lowering springs on a Q4

For info about upgrading the 164.
Post Reply
User avatar
Tamariini
Posts: 212
Joined: Wed Feb 01, 2012 6:54 pm

Lowering springs on a Q4

Post by Tamariini »

Anyone found a decent set of lowering springs to be used in Q4?

I'm not looking for a sump-breaking 60-80mm of lowering but more likely 20-30mm.

Does original shocks work with a lowered suspension? anyone tried?
--Fiat 500c 2022--
--Alfa Romeo 75 3.0 V6 1987--
--Alfa Romeo Spider 2.0 TS 1972--
--Maserati 3200 GT 2001--
--Maserati Quattroporte 4.7S 2009--
--Lancia Delta HF Integrale 16v--
User avatar
alfa east
3.0 V6 24V automatic
Posts: 1130
Joined: Sat Oct 24, 2009 10:26 am
Location: Bangkok

Re: Lowering springs on a Q4

Post by alfa east »

Tamariini wrote:Does original shocks work with a lowered suspension? anyone tried?
Yes: http://www.alfabb.com/bb/forums/164-168 ... 64-q4.html
User avatar
alfa east
3.0 V6 24V automatic
Posts: 1130
Joined: Sat Oct 24, 2009 10:26 am
Location: Bangkok

Re: Lowering springs on a Q4

Post by alfa east »

Image
User avatar
Tamariini
Posts: 212
Joined: Wed Feb 01, 2012 6:54 pm

Re: Lowering springs on a Q4

Post by Tamariini »

I bought a new set of OZ ultraleggera's at 19" as a christmas present for my Q4 :D

So this lowering issue is now back on again. I think car would look strange with those wheels without lowering...

Image

Also bought a set of Ferrari 355 brake calibers to upgrade the brakes :wink:

Anyone knows where to get lowering springs?
--Fiat 500c 2022--
--Alfa Romeo 75 3.0 V6 1987--
--Alfa Romeo Spider 2.0 TS 1972--
--Maserati 3200 GT 2001--
--Maserati Quattroporte 4.7S 2009--
--Lancia Delta HF Integrale 16v--
User avatar
ALFAHEIDA
3.5 V6 12V Savali owner
Posts: 1069
Joined: Wed May 27, 2009 7:33 pm
Location: Alfacity
Contact:

Re: Lowering springs on a Q4

Post by ALFAHEIDA »

There are no providors anymore to lower a Q4.
You could sent an email regarding this to H&R, but I think the're out of stock for a long while.
Alfa 164 3.0 12V Automatic '89
Alfa 159 1750 Tbi Ti SW
User avatar
alfa east
3.0 V6 24V automatic
Posts: 1130
Joined: Sat Oct 24, 2009 10:26 am
Location: Bangkok

Re: Lowering springs on a Q4

Post by alfa east »

Have you written an email to Frank?
http://www.alfabb.com/bb/forums/164-168 ... 64-q4.html" onclick="window.open(this.href);return false;
User avatar
Tamariini
Posts: 212
Joined: Wed Feb 01, 2012 6:54 pm

Re: Lowering springs on a Q4

Post by Tamariini »

alfa east wrote:Have you written an email to Frank?
http://www.alfabb.com/bb/forums/164-168 ... 64-q4.html" onclick="window.open(this.href);return false;
I tried, but didn't get in contact with him.
--Fiat 500c 2022--
--Alfa Romeo 75 3.0 V6 1987--
--Alfa Romeo Spider 2.0 TS 1972--
--Maserati 3200 GT 2001--
--Maserati Quattroporte 4.7S 2009--
--Lancia Delta HF Integrale 16v--
User avatar
alfa east
3.0 V6 24V automatic
Posts: 1130
Joined: Sat Oct 24, 2009 10:26 am
Location: Bangkok

Re: Lowering springs on a Q4

Post by alfa east »

And I guess to J. Prinsen as well?
From the same thread:
http://www.alfabb.com/bb/forums/164-168 ... -q4-3.html" onclick="window.open(this.href);return false;
User avatar
alfa east
3.0 V6 24V automatic
Posts: 1130
Joined: Sat Oct 24, 2009 10:26 am
Location: Bangkok

Re: Lowering springs on a Q4

Post by alfa east »

Tamariini wrote:
alfa east wrote:Have you written an email to Frank?
http://www.alfabb.com/bb/forums/164-168 ... 64-q4.html" onclick="window.open(this.href);return false;
I tried, but didn't get in contact with him.
He is not active anymore on the forums (fora?)

I guess he ordered the springs here (since he mentions that factory was founded in 1853):
http://www.federn-bischoff.de/index.en. ... v=bischoff" onclick="window.open(this.href);return false;
alfa164superwebmaster
Q4 owner
Posts: 60
Joined: Wed Sep 30, 2009 2:29 pm

Re: Lowering springs on a Q4

Post by alfa164superwebmaster »

I know this is going to sound crazy, but you can actually cut 1 or even 2 rings of the rear springs without any issues.

I lowered my Q4 using this method when running my 19" OZ Superleggera's, and it worked fine.

There remains plenty of pre-load on the springs, and I would not want stiffer springs in combination with the low 35 serie tires.

For the front you can use regular 24v lowering springs (e.g. FK / Eibach, etc.)
User avatar
hilko
Q4 owner
Posts: 88
Joined: Thu Nov 05, 2009 10:31 pm

Re: Lowering springs on a Q4

Post by hilko »

alfa164superwebmaster wrote:I know this is going to sound crazy, but you can actually cut 1 or even 2 rings of the rear springs without any issues.

I lowered my Q4 using this method when running my 19" OZ Superleggera's, and it worked fine.
Not too stiff or too short a travel height of the springs when driving fast?
An acquaintance of mine once tried this on his car and at higher speeds I was glad I had my flight license in my pocket even on a Dutch highway...

Isn't there any risk of leaking stock absorbers when they are not new anymore? The internal seal ring will be in contact with a possible rougher surface, or is this just theoretically speaking?
164Q4.... Beauty is not enough
alfa164superwebmaster
Q4 owner
Posts: 60
Joined: Wed Sep 30, 2009 2:29 pm

Re: Lowering springs on a Q4

Post by alfa164superwebmaster »

No, it was trouble free ;-)

There remains plenty of travel in the suspension for the shockabsorbers to work correctly.
At the front you will need a pair of 'regular' lowering springs, but these are easy to come by.

The rear shock absorbers are pretty forgiving, if you remember the Alfa Boet 164 Q4 that was rediculously low at the rear (alledgedly special springs by Savali), that car used the original shocks and didnt handle too bad either (just got stuck on every speed bump :-))
shane
Posts: 37
Joined: Sun May 01, 2016 12:17 am
Location: Kingston SE

Re: Lowering springs on a Q4

Post by shane »

Tamariini wrote:I bought a new set of OZ ultraleggera's at 19" as a christmas present for my Q4 :D

So this lowering issue is now back on again. I think car would look strange with those wheels without lowering...

Image

Also bought a set of Ferrari 355 brake calibers to upgrade the brakes :wink:

Anyone knows where to get lowering springs?
I loved our brake setup ,I was thinking of using Volvo 4 pot calipers with slotted rotors
I only have 17x6 1/2" with 215x45x17 tyres
Do you fine that the CV drive shaft rub on the power steering belt ?
cheers mate
Shane
Alfissimo International
164 Q owner
Posts: 45
Joined: Sat Oct 24, 2009 2:48 pm
Location: USA
Contact:

Re: Lowering springs on a Q4

Post by Alfissimo International »

I would not recommend too much lowering or lowering at all. You do not gain much from it. I am working on some springs that lower the front but need some rear Q4 springs to copy. Otherwise you can cut 1 coil off rear but you run the risk of wearing out electronic struts much quicker and you loose the factory suspension geometry which is pretty much flawless.
User avatar
Alfan
Q4 owner
Posts: 1377
Joined: Thu Oct 22, 2009 8:20 pm
Location: Denmark
Contact:

Re: Lowering springs on a Q4

Post by Alfan »

Look at this thread, it is possible to get Q4 rear springs:

http://alfaromeo164register.com/viewtop ... &start=125" onclick="window.open(this.href);return false;
1994 Alfa Romeo 164 Q4 Proteo Rosso
1989 Lancia Thema 8.32 Verde Reflex
2001 AR Spider 3.0 24V Blue Lightning
2015 AR 4C Rosso Competizione
2021 AR Giulia Sprint Anodized Blu
1980 AR Alfetta Blindata Bianco
2003 AR 166 3.2 Grigio
pauliecarzz
Posts: 36
Joined: Sat Oct 01, 2011 2:45 pm

Re: Lowering springs on a Q4

Post by pauliecarzz »

Bringing this one back to life!
I'm working on a custom set of Lowering springs for the Q4.
having the factory spring rates tested and will fabricate a new set according to those rates. I will have the rates increased as I feel the factory springs are to Soft and create too much bounce. If anyone is interested I may be able to get a discounted price on a group buy.
This is in it's very very early stages so patience is a virtue. I'll post the rates once I have them.
You can pm me if you're interested or give a comment here.
Thanks Paul
User avatar
ALFAHEIDA
3.5 V6 12V Savali owner
Posts: 1069
Joined: Wed May 27, 2009 7:33 pm
Location: Alfacity
Contact:

Re: Lowering springs on a Q4

Post by ALFAHEIDA »

Nice effort Paul.
😎
Alfa 164 3.0 12V Automatic '89
Alfa 159 1750 Tbi Ti SW
User avatar
Alfan
Q4 owner
Posts: 1377
Joined: Thu Oct 22, 2009 8:20 pm
Location: Denmark
Contact:

Re: Lowering springs on a Q4

Post by Alfan »

pauliecarzz wrote:
Sun Mar 21, 2021 5:40 pm
Bringing this one back to life!
I'm working on a custom set of Lowering springs for the Q4.
having the factory spring rates tested and will fabricate a new set according to those rates. I will have the rates increased as I feel the factory springs are to Soft and create too much bounce. If anyone is interested I may be able to get a discounted price on a group buy.
This is in it's very very early stages so patience is a virtue. I'll post the rates once I have them.
You can pm me if you're interested or give a comment here.
Thanks Paul
My experience is that my Q4 never were soft - it may have been in sport mode most the time :D which dampers do you have on the car?

Looking forward to hear what you get out of it 👍
1994 Alfa Romeo 164 Q4 Proteo Rosso
1989 Lancia Thema 8.32 Verde Reflex
2001 AR Spider 3.0 24V Blue Lightning
2015 AR 4C Rosso Competizione
2021 AR Giulia Sprint Anodized Blu
1980 AR Alfetta Blindata Bianco
2003 AR 166 3.2 Grigio
pauliecarzz
Posts: 36
Joined: Sat Oct 01, 2011 2:45 pm

Re: Lowering springs on a Q4

Post by pauliecarzz »

Alfan wrote:
Sat Apr 17, 2021 6:29 pm
pauliecarzz wrote:
Sun Mar 21, 2021 5:40 pm
Bringing this one back to life!
I'm working on a custom set of Lowering springs for the Q4.
having the factory spring rates tested and will fabricate a new set according to those rates. I will have the rates increased as I feel the factory springs are to Soft and create too much bounce. If anyone is interested I may be able to get a discounted price on a group buy.
This is in it's very very early stages so patience is a virtue. I'll post the rates once I have them.
You can pm me if you're interested or give a comment here.
Thanks Paul
My experience is that my Q4 never were soft - it may have been in sport mode most the time :D which dampers do you have on the car?

Looking forward to hear what you get out of it 👍
The car is in stock form. I'll keep you posted, working out a few bugs at the moment. thanks
User avatar
alfaturbo75
Posts: 14
Joined: Sun Sep 01, 2013 6:08 am
Location: Obbola

Re: Lowering springs on a Q4

Post by alfaturbo75 »

Any progress on this topic?
I am looking for springs as well to my Q4.

Regards//
159 SW -07
164 Q4 -94 (http://www.alfapower.nu/viewthread.php?tid=31989" onclick="window.open(this.href);return false;)
75 TS turbo (http://www.alfapower.nu/viewthread.php?tid=29835" onclick="window.open(this.href);return false;)
75 turbo Race car (http://www.alfapower.nu/viewthread.php?tid=21966" onclick="window.open(this.href);return false;)
User avatar
Alfan
Q4 owner
Posts: 1377
Joined: Thu Oct 22, 2009 8:20 pm
Location: Denmark
Contact:

Re: Lowering springs on a Q4

Post by Alfan »

You will be lucky to find a set of original rear Q4 springs...

If you do, please update us :)
1994 Alfa Romeo 164 Q4 Proteo Rosso
1989 Lancia Thema 8.32 Verde Reflex
2001 AR Spider 3.0 24V Blue Lightning
2015 AR 4C Rosso Competizione
2021 AR Giulia Sprint Anodized Blu
1980 AR Alfetta Blindata Bianco
2003 AR 166 3.2 Grigio
pauliecarzz
Posts: 36
Joined: Sat Oct 01, 2011 2:45 pm

Re: Lowering springs on a Q4

Post by pauliecarzz »

I've been dealing with other projects and have not had time to start the process of lowering spring for the Q4.. But for stock springs try these 2 contacts.
try Jurgen
weldtech@online.nl
I found the springs brand new few years ago on https://www.autosklep24.pl/pl/sales but not sure they still have them but doesn't hurt to email them. Good luck
User avatar
AlfaWhiz
Posts: 455
Joined: Thu Feb 06, 2014 1:15 pm

Re: Lowering springs on a Q4

Post by AlfaWhiz »

I can recommend this shop: https://www.autosklep24.pl/pl/sales

Shopped with them many times, shoot them and email and ask for what you need, the owner has some other sources as well and sometimes can get stuff outside of the shop's inventory. Got a spare set of rear Q4 springs from him a few years ago when they were there, engine mounts, various bushings, etc.
JakubMierz
Posts: 1
Joined: Wed Sep 28, 2022 11:50 am
Contact:

Re: Lowering springs on a Q4

Post by JakubMierz »

Zgadzam się! sam próbowałem, naprawdę polecam
Post Reply